GM Tech-2 PRO Kit (Candi & Tis) Free Shipping for All GM Vehicles

GM TECH2 - GM, OPEL, SAAB, SUZUKI Tester.
The Tech2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010.

Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

Vetronix Tech-2 Specifications
Dimensions 12× 6× 2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
Future expansion.
Communications Integral RS232 communication port.
Screen 3.8× 2.8 backlit monochrome with full graphics
Capability: 320× 240 pixels. Displays up to 9 vehicle
Parameters at once

GM Tech-2 PRO Kit with Candi Module & TIS Kit includes and dongle. 32 PCMCIA card with newest diagnosis files, can be reprogrammed to isuzu, opel, Saab freely.

Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download (199.2 kb)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/Security features
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case

Tech-2 Users Manual download ( 3.9 MB )
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; You will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash's diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.